Contact Us

Brand Socomec UPS System Industrial UPS Socomec Make 200 KVA 3:3 Phase Industrial On Line UPS With Built-In Isolation Transformer

Socomec Make 200 KVA 3:3 Phase Industrial On Line UPS With Built-In Isolation Transformer

UPS System Industrial UPS

Price: 1451400

You save 1475000

Resilient transformer-based power protection

The solution for
• Industry
• Processes
• Infrastructure
• Healthcare
• Service sector
• Telecommunications

Advantages
High quality power supply
• Permanent operation in VFI mode (online double conversion).
• Output voltage precision under all load conditions.
• High overload capacity to withstand abnormal load conditions.
• A very high short-circuit current capacity which facilitates the selection of protective devices for selectivity in the downstream distribution.
• An isolation transformer installed on the inverter output to ensure complete galvanic isolation between DC circuit and load output. This insulation also provides a separation between the two inputs when they are supplied by different sources.
• Sinusoidal ThdU output voltage < 2 % with linear loads and < 4 % with non-linear loads.

High availability
• Field-proven technology.
• Fault-tolerant architecture with redundancy of basic functions, such as the ventilation system.
• Easy maintainability reduces MTTR thanks to pull-out sub-assemblies and front access all components.
• Accurate diagnostics guarantee power supply to the load.
• Cascade failure prevention for parallel systems.
• Mechanical & electrical robustness for industrial environments.
• Soft start capability (ramp up) of the IGBT inverter allows a good operation even with a genset.
• Specifically designed to be adapted to different industrial environment: high IP protection options, high peak current capability, long back up time…

Cost-effective equipment
• The "clean" IGBT rectifier allows:
- a high efficiency,
- a high and constant input power factor,
- a low THDi.
These characteristics help to limit the dimensions of upstream network infrastructure.
• Possibility to create new neutral system without additional losses (extra transformer required on by-pass line only).
• High short-circuit capability simplifies downstream protective devices.
• High power density: its small footprint saves space on your premises.
• Mains connection of the rectifier requires only 3 cables (no neutral).
• Battery connection to UPS requires only 2 cables.

User-friendly operation
• A control panel with graphic display for more ergonomic operation.
• An array of "com-slot" plug-in communication interfaces, for upgrading your operating requirements evolution.

Simplified maintenance
• An advanced diagnostic system.
• A remote access device connected to the remote maintenance centre.
• Easy access to subassemblies and components, facilitating tests and reducing maintenance time (MTTR).
Model Delphys MP Elite+200K

Reset default

Specification

Output Specification
Output Capacity (KVA )
200 KVA
Output Capacity (KW )
180 KW
Output Power Factor
0.9 Power Factor
Output Phase
3 Phase
Output Voltage
400 Volt
Other Output Voltage
380 Or 415 Volt
Efficiency at Full Load
>93.5 %
Output Voltage Distortion
<2 %
Output Frequency (sync to mains)
50/60Hz +/- 3 Hz
Load Crest Factor
3:1
Output Voltage THD
< 3% linear load and <5% non-linear load
Output Waveform type
Sine Wave
Output Connections
Hard Wire 5-wire (3PH + N + G)
Bypass
Built-in Static Bypass
UPS Parallel Upto
6 Nos.
Input Specification
Input Voltage
400 Volt
Other Input Voltage
380 - 415 Volt
Input Phase
3 Phase
Input frequency Range
45 - 65 Hz
Input voltage range for main operations
340 - 460 Volt
Input Power Factor
0.99
Input Connections
Hard Wire 5-wire (3PH + N + G)
Batteries & Runtime
Battery DC Bus
348 - 384 VDC
Battery Type Compatibility
Sealed Maintenance Free (SMF) / Valve Regulated Lead Acid (VRLA) type, Flooded / tubular / vented type
Battery Position Option
External
Battery Circuit Breaker
Inclusive
Approved Battery Capacity (AH)
200 - 400 Amp.
Communication & Management
Control panel
Multi-function LCD status and control console
SNMP Management
Optional
Power Management Software
In-Built
Audible noise at 1 meter from surface of unit
67 Decibal
Physical
Maximum Height
1930 Mm
Maximum Width
100 Mm
Maximum Depth
800 Mm
Net Weight
1020 Kg
Colour
RAL 9003
Environmental
Operating Temperature
0 - 40 °C
Operating Relative Humidity
0 - 95 %
Protection Class
IP20
Compliances
Compliance
EN/IEC 62040-1, IEC 62040-2, IEC 62040-3, IEC 62040-4

Documentation

Item Catalogue
Socomec Delphys MP Elite Catalogue
pdf